Last reviewed 2026-10-26
1. Stay safe around the damage
A partially collapsed enclosure can shift without warning. Keep people and pets out from under bent beams, and be careful of any electrical equipment, lighting, or pool equipment near the damage. If anything electrical is involved, have it checked before using the pool area.
2. Document everything before cleanup
Take wide photos and video of the whole enclosure from several angles, then close-ups of every bent member, torn panel, and broken connection. Photograph any damage to the house, deck, or pool the cage caused. Do this before anything is moved.
3. Contact your insurance company
Report the damage to your insurer promptly and ask how they want documentation and estimates submitted. Coverage, deductibles, and what's included are decided by your policy and your insurer — not by any contractor. A contractor can provide a written assessment and estimate to support your claim.
4. Hire a licensed contractor — and verify it
Florida requires a state license for this work. Before signing anything, look up the contractor's license number on the Florida DBPR website and confirm it's current and active.
Be cautious about large up-front deposits. Florida law places conditions on contractors who accept a deposit of more than 10% of the contract price, including deadlines to apply for permits and to start work (section 489.126, Florida Statutes).
- Get the scope in writing: removal, engineering, permit, frame, screen, cleanup.
- Ask whether the replacement will be engineered to current wind requirements.
- Don't sign over insurance benefits without understanding exactly what you're agreeing to.
5. Rebuild to today's code
Florida's wind design requirements were strengthened substantially after Hurricane Andrew, and older cages may have been built to lower standards. A permitted replacement is engineered for current requirements at your address — a good reason not to simply patch an old frame that failed.
Common questions
Can a storm-damaged pool cage be repaired instead of replaced?
Sometimes. If damage is limited to screens or a few members and the rest of the frame is sound, repair or rescreening can work. Widespread bending or failed connections usually mean replacement. An on-site evaluation is the only reliable way to tell.
Do I need a permit to replace a hurricane-damaged pool enclosure?
A full replacement requires a permit and engineering. Your licensed contractor applies for it and schedules inspections.
Will insurance pay for my pool cage?
That depends entirely on your policy and the cause of the damage. Talk to your insurer; a contractor can supply photos, an assessment, and an estimate for your claim.
Sources
This guide is general information, not engineering, legal, or insurance advice. Project-specific decisions are made by the licensed contractor and, for claims, your insurer.
