Skip to content
St. Pete Sunrooms& Enclosures
Inside a gabled dark bronze pool enclosure: rectangular pool and spa, travertine deck, and stacked-stone water feature
Southeastern project

Screened pool enclosures

Pool Enclosures in St. Petersburg

A well-designed pool cage keeps leaves, bugs, and debris out of the water and turns your pool deck into an outdoor room. In St. Pete, it also has to stand up to coastal wind — so the engineering matters as much as the look.

Less maintenance

Screens keep out leaves, debris, and much of the pollen that ends up in your skimmer.

More usable hours

Enjoy the pool deck at dusk without mosquitoes and no-see-ums.

Wind-engineered

Frames are designed for Pinellas County wind loads and permitted with signed engineering.

Choosing a roof style

The roof shape of your enclosure sets its personality and affects how it sheds wind and rain. The best style usually echoes your home's roofline.

  • Mansard — the classic Florida pool cage with a flat top and sloped sides
  • Dome — a curved, open feel; works well for larger pools
  • Gable — a peaked roof that matches many homes' rooflines
  • Hip — sloped on all sides for a polished, architectural look
Gable-roof dark bronze pool enclosure over a pool and paver deck, with live oaks behind the homeSoutheastern project

Screen and view options

Standard pool screen is a good all-around choice. Finer "no-see-um" mesh blocks the tiny biting insects common near water. Privacy screen can be used on walls facing neighbors. A picture window panel removes the horizontal bar across the view — popular on waterfront lots.

Frame finishes and details

Aluminum frames are typically offered in white or bronze. Bronze tends to disappear visually against landscaping and water, while white feels bright and coastal. Details like kick plates, doors with closers, and gutters all affect daily use.

Southeastern's structures can use powder-coated aluminum, which holds its finish in Florida sun, and stainless steel fasteners, which resist corrosion — especially valuable near salt water. Your proposal lists the exact materials for your enclosure.

About wind ratings

Enclosures are engineered for the design wind speed and exposure at your address. Southeastern's engineered systems can be designed for wind speeds up to 150 mph where the specific engineered design and product documentation support it. The actual rating for your enclosure is stated in its engineering and permit documents — it isn't a blanket figure for every project.

Screen options

Availability and recommendations vary by product line and exposure.
Standard pool screenNo-see-um meshPrivacy screen
AirflowBestGoodReduced
Tiny insectsSome get throughBlockedBlocked
Visibility outClearSlightly softerLimited
Typical useMost walls & roofsNear water & wetlandsWalls facing neighbors

Planning in St. Petersburg & Pinellas County

Coastal wind exposure

Homes near Tampa Bay, the Gulf, and open water can fall into higher wind-exposure categories, which affects beam sizes and anchoring.

Pool safety barrier rules

Florida's residential pool safety law requires barriers for new pools. A properly designed enclosure can be part of that — ask your builder how your design meets current requirements.

Saltwater and salt air

Salt air near the water is hard on fasteners and finishes. Ask about corrosion-resistant hardware for waterfront homes.

Common questions

Does a pool enclosure need a permit in Pinellas County?

Yes. New pool enclosures require a permit and engineering. The licensed contractor pulls the permit and schedules required inspections.

What's a picture window in a pool cage?

It's a section built without the horizontal chair rail at eye level, so you get an uninterrupted view of the water or yard.

How strong is a pool enclosure in a hurricane?

Enclosures are engineered to the wind requirements for your address. Systems can be designed for up to 150 mph where the engineered design and product documentation support it; your permit documents state the actual rating. No screen enclosure is designed to be storm-proof in every condition.

Is there a warranty?

Southeastern provides a two-year workmanship warranty on its installations. It covers workmanship; material warranties follow the manufacturers. The exact terms are in your written construction agreement.

White or bronze frame?

It's mostly a design choice. Bronze blends into landscaping; white looks bright and clean. Your builder can show samples during the consultation.

How your pool enclosures project comes together

  1. 1

    Request

    Tell us what you're planning and share a few photos — about three minutes.

  2. 2

    Consultation

    Southeastern Home Improvements visits, measures, and walks through options with you.

  3. 3

    Written estimate

    A detailed, no-obligation estimate you can compare line by line.

  4. 4

    Permit & build

    Engineering, permits, construction, and inspections handled by your builder.

Dark bronze screened pool enclosure at dusk next to a tile-roof homeSoutheastern project

Free project consultation

Ready to talk about your pool enclosure project?

Tell us about your project and a licensed builder from Southeastern Home Improvements will reach out to schedule a free, no-obligation consultation at your home.

Call NowFree Estimate